NETGEAR RangeMax Next Wireless Router WNR834B WNR834B WNR834B User Manual page 17

Tip: You can connect to the wireless router by typing either of these URLs in the
address field of your browser and then pressing Enter:
http://www.routerlogin.net
•
http://www.routerlogin.com
•
If these URLs do not work, you must type the IP address of the router, such as:
http://www.192.168.1.1
•
2. Enter for the router user name and your password (or the default,
admin
change the password, see
Note: The router user name and password are not the same as any user name or
password you may use to log in to your Internet connection.
The Checking for Firmware Updates screen appears unless you previously deselected the
Check for Updated Firmware Upon Log-in radio box.
Figure 1-2
If the router discovers a newer version of software, you will be asked if you want to upgrade to
the new software (see
firmware is available, the following message will appear.
Configuring Basic Connectivity
NETGEAR RangeMax™ NEXT Wireless Router WNR834B User Manual
"Changing the Administrator Password" on page
"Upgrading the Router Software" on page 6-8
v2.1, July 2007
To
password).
2-14.
for details). If no new
1-3