NETGEAR RangeMax Next Wireless Router WNR834B WNR834B WNR834B User Manual page 29

Figure 1-10
Note: The device name should be set to a name that is easy to identify in your
network. You can see this name in the Vista network map and network
explorer.
To add a WPS client using the built-in registrar:
1. Select Vista Settings under the Advanced section of the main menu. The Vista Settings screen
will display.
2. Select the Enable Built-in Registrar checkbox and click Apply. The Enable Built-in
Registrar will be enabled.
3. Click Add a Wireless Client. The dialog box will prompt you for the client's PIN which is
prompted from the client utility. (You should be able to view the client's PIN using the client's
configuration utility.)
4. Click Add. The Wireless Client will be added to your network
Configuring Basic Connectivity
NETGEAR RangeMax™ NEXT Wireless Router WNR834B User Manual
v2.1, July 2007
1-15