Viewing A List Of Attached Devices; Configuration File Management - NETGEAR MR814 v3 Reference Manual

Reference Manual for the MR814 v3 Cable/DSL Wireless Router

Viewing a List of Attached Devices

The Attached Devices menu contains a table of all IP devices that the router has discovered on the
local network. From the Main Menu of the browser interface, under the Maintenance heading,
select Attached Devices to view the table, shown below.
Figure 6-4: Attached Devices menu
For each device, the table shows the IP address, NetBIOS Host Name (if available), and Ethernet
MAC address. Note that if the router is rebooted, the table data is lost until the router rediscovers
the devices. To force the router to look for attached devices, click the Refresh button.

Configuration File Management

The configuration settings of the MR814 v3 router are stored within the router in a configuration
file. This file can be saved (backed up) to a user's PC, retrieved (restored) from the user's PC, or
cleared to factory default settings.
Maintenance 6-5
202-10039-01