Connection Status - NETGEAR N750 User Manual

N750 Wireless Dual Band Gigabit Router WNDR4000 User Manual
Port
The statistics for the WAN (Internet), LAN (local), and wireless LAN (WLAN) ports. For each
port, the screen displays the following:
Status. The link status of the port.
•
TxPkts. The number of packets transmitted since reset or manual clear.
•
RxPkts. The number of packets received since reset or manual clear.
•
Collisions. The number of collisions since reset or manual clear.
•
Tx B/s. The current line utilization—percentage of current bandwidth used.
•
Rx B/s. The average line utilization.
•
Up Time. The time elapsed since the last power cycle or reset.
•

Connection Status

In the Router Status screen, click the Connection Status button to display a screen similar to
this:
IP Address. The IP address that is assigned to the router.
Subnet Mask. The subnet mask that is assigned to the router.
Default Gateway. The IP address for the default gateway that the router communicates with.
DHCP Server. The IP address for the Dynamic Host Configuration Protocol server that
provides the TCP/IP configuration for all the computers that are connected to the router.
DNS Server. The IP address of the Domain Name Service server that provides translation of
network names to IP addresses.
Lease Obtained. The date and time that the lease was obtained.
Lease Expired. The date and time that the lease will expire.
Click the Release button to release the connection status items (that is, all items return to
•
0).
Chapter 5. Network Maintenance | 55