Unsuccessful Internet Connection; Change Password - NETGEAR N750 User Manual

N750 Wireless Dual Band Gigabit Router WNDR4000 User Manual
traffic only from the MAC address of that computer. This feature allows your wireless
router to masquerade as that computer by "cloning" its MAC address.
Use Default Address. Use the default MAC address of the router (normally the LAN
MAC address).
Use Computer MAC Address. The wireless router will capture and use the MAC
address of the computer that you are now using. You must be using the one computer
that is allowed by the ISP.
Use This MAC Address. Enter the MAC address that you want to use.

Unsuccessful Internet Connection

Review your settings to be sure that you have selected the correct options and typed
1.
everything correctly.
Contact your ISP to verify that you have the correct configuration information.
2.
Read
3. Chapter 8,
contact NETGEAR Technical Support.
If you cannot connect to the wireless router, check the Internet Protocol (TCP/IP) properties
4.
in the Network Connections section of your PC Control Panel. They should be set to obtain
both IP and DNS server addresses automatically. See your computer documentation.

Change Password

For security reasons, the wireless router has its own user name of admin with a password
that defaults to password. You can and should change the password to a secure password
that is easy to remember. The ideal password contains no dictionary words from any
language and is a mixture of upper-case and lower-case letters, numbers, and symbols. It
can be up to 30 characters.
The wireless router user name and password are not the same as
Note:
the user name and password for logging in to your Internet
connection. See
about login types.
Troubleshooting. If problems persist, register your NETGEAR product and
Types of Logins
on page 24 for more information
Chapter 2. Set Up Your Internet Connection | 23