Upgrade Firmware; Router Interface - NETGEAR N750 User Manual

Upgrade Firmware

When you log in, if you are connected to the Internet, the Firmware Upgrade Assistant screen
displays so you can upgrade to the latest firmware. See
for more information about upgrading firmware.
Click Yes to check for new firmware (recommended). The wireless router checks the
NETGEAR database for new firmware.
If no new firmware is available, click No to exit. You can check for new firmware later.
•
If new firmware is available, click Yes to upgrade the wireless router with the latest
•
firmware. After the upgrade, the wireless router restarts.
CAUTION:
Do not try to go online, turn off the wireless router, shut down the
computer, or do anything else to the wireless router until the wireless
router finishes restarting and the Power LED has stopped blinking for
several seconds.
You cannot upgrade firmware until you have established your Internet connection as
described in
Setup Wizard

Router Interface

The wireless router interface lets you view or change the wireless router settings. The left
column has menus, and the right column provides online help. The middle column is the
screen for the current menu option.
Menus
(scroll
down to
view
more)
Figure 1. Router interface
18 | Chapter 2. Set Up Your Internet Connection
N750 Wireless Dual Band Gigabit Router WNDR4000 User Manual
on page 19.
Upgrade the Firmware
Language
Help for the
current screen
Screen selected
from the menu
on page 50,