Vpn Tunnel Control; Activating A Vpn Tunnel - NETGEAR DG834G 54 Mbps Wireless ADSL Firewall DG834G DG834G User Manual
Wireless adsl2+ modem router
Hide thumbs
Also See for DG834G 54 Mbps Wireless ADSL Firewall DG834G DG834G:
- Reference manual (178 pages) ,
- Setup manual (44 pages) ,
- Reference manual (168 pages)
Table of Contents
Advertisement
VPN Tunnel Control
Activating a VPN Tunnel
There are three ways to activate a VPN tunnel:
•
Use the VPN Status screen.
•
Activate the VPN tunnel by pinging the remote endpoint.
•
Start using the VPN tunnel.
Note: See
"Using Auto Policy to Configure VPN Tunnels" on page 6-32
about how to enable the IKE keepalive capability on an existing VPN tunnel.
Using the VPN Status Page to Activate a VPN Tunnel
To use the VPN Status screen to activate a VPN tunnel:
1. Log in to the modem router.
2. On the main menu, select VPN Status. The VPN Status/Log screen displays:
Figure 6-29
Virtual Private Networking
Wireless ADSL2+ Modem Router DG834G User Manual
v1.0, May 2008
for information
6-25
Advertisement
Table of Contents
Troubleshooting
