Breville vtp141 User Manual page 6

assembling
Always make sure the appliance is switched off and unplugged from the mains
supply before assembling or disassembling.
1. Apply a light coating of vegetable oil to the grinding plate, cutting blade and feed
screw before use.
2. Insert the shaft of the feed screw into the grinding head.
3. Position the hexagonal hole in the cutter onto the hexagonal end of the feed screw.
The cutter has a rounded side and a sharpened side. The sharpened side must face
outwards (away from the feed screw and towards the cutting plate).
4. Position the desired grinding plate onto the feed screw spindle. Locate the lugs on
either side of the grinding plate into the two slots of the grinding head.
5. Screw the securing ring firmly onto the grinding head.
6. Loosen the locking knob and insert the assembled grinding head into the motor unit
opening. You may need to rotate it slightly until it is seated correctly within the motor
unit. Tighten the locking knob securely.
7. Slot the feed tray into the grinding head.
8. Insert the food pusher into the opening of the grinding head.
Your meat grinder is now assembled and ready for use.
6