NETGEAR GA511 User Manual page 18

NETGEAR 10/100/1000 Mbps CardBus Adapter GA511 User Manual
Next, install the GA511 Gigabit CardBus
Adapter.
a. Locate an available CardBus slot on the
side of your notebook. Hold the PC Card
with the NETGEAR logo facing up and
insert it into the CardBus slot.
Note: Do not use excessive force, but
make sure the card is fully inserted into
the slot.
b. A Found New Hardware Wizard dialog
box appears, indicating that Windows
has found the adapter. Accept the "Install
the software automatically" setting, and
click Next to proceed.
Note: If Windows Vista, XP or 2000
displays a Windows XP Logo Testing or
a Digital Signature Not Found warning,
click Continue Anyway or Yes to
proceed.
c. Click Finish to complete the installation.
If prompted to restart the computer,
remove your adapter CD from the
CDROM drive and click OK. You will
see the GA511 Smart Wizard icon on the
lower right of the Windows task bar.
2-4
Windows Found New Hardware Wizard
Local Area Connection Icon before you connect a
For assistance with configuring the network
settings, please see the networking tutorials on
the NETGEAR Adapter Resource CD.
v2.0, March 2007
network cable
GA511 System Tray icon