Cleaning, Care & Maintenance; Troubleshooting - Buffalo CD582 Instruction Manual

UK
Cleaning, Care & Maintenance
Note: Always switch off and disconnect the appliance from the power supply before
cleaning. Always allow the appliance to cool before emptying or cleaning.
• Wipe down the exterior of the appliance with a damp cloth.
• Use a suitable stainless steel cleaner. Some cleaning agents may cause damage when used for a
prolonged period on stainless steel.
• Dry the exterior thoroughly.
• Wash all removable parts in warm, soapy water and dry thoroughly.

Troubleshooting

If your BUFFALO appliance develops a fault, please check the following table before making a call to the
Helpline.
Fault
The unit is not working
3
Probable Cause
The unit is not switched on
Plug and lead are damaged
Fuse in the plug has blown
Power supply
Internal wiring fault
The thermal cut out switch has
activated
The thermostat has not been
set correctly
The heating element has failed Call BUFFALO agent or qualified
Action
Check the unit is plugged in correctly
and switched on
Call BUFFALO agent or qualified
technician
Replace the plug fuse
Check power supply
Call BUFFALO agent or qualified
technician
Reset Thermal Cut-Out switch
Set the thermostat to a higher
temperature
technician