Telephone Helpline: 0845 146 2887 Safety Tips • Position on a flat, stable surface. • A service agent/qualified technician should carry out installation and any repairs if required. Do not remove any components on this product. • Consult Local and National Standards to comply with the following: - Health and Safety at Work Legislation - BS EN Codes of Practice...
• Instruction manual BUFFALO prides itself on quality and service, ensuring that at the time of packaging the contents are supplied fully functional and free of damage. Should you find any damage as a result of transit, please contact your BUFFALO dealer immediately.
Telephone Helpline: 0845 146 2887 Operation Control panel The control panel is located below the handle on the front of the appliance. On/off switch Up button Heating indicator Light button SET button Down button Cabinet Temperature Turn On 1. Ensure the on/off switch is set to O and connect the appliance to a mains power supply. 2.
Do not use abrasive cleaning agents. These can leave harmful residues. • Always wipe dry after cleaning. Replacing the Interior Lamp • Call your BUFFALO dealer or a qualified electrician. The Lamp Assembly is available to purchase as a spare part. Troubleshooting Fault Probable Cause...
All rights reserved. No part of these instructions may be produced or transmitted in any form or by any means, electronic, mechanical, photocopying, recording or otherwise, without the prior written permission of BUFFALO. Every effort is made to ensure all details are correct at the time of going to press, however, BUFFALO reserve the right to change specifications without notice.