Emptying The Appliance; Cleaning, Care & Maintenance; Troubleshooting - Buffalo L310 Instruction Manual

UK

Emptying the Appliance

Note: Always switch the appliance off allow the water to cool before emptying.
L310/S047 - Turn on the tap to drain the water. Ensure a suitable container is used to collect the water.
L371/S007/S077 - Use a suitable container to remove the water from the appliance.
Cleaning, Care & Maintenance
Note: Always switch off and disconnect the appliance from the power supply before
cleaning. Always allow the appliance to cool before emptying or cleaning.
• Wipe down the exterior of the appliance with a damp cloth.
• Some cleaning agents may cause damage when used for a prolonged period on stainless steel. Use a
suitable stainless steel cleaner.
• Dry the exterior thoroughly.
• Wash all removable parts in warm, soapy water.

Troubleshooting

If your BUFFALO appliance develops a fault, please check the following table before making a call to the
Helpline.
Fault
The unit is not working
3
Probable Cause
The unit is not switched on
Plug and lead are damaged
Fuse in the plug has blown
Power supply
Internal wiring fault
The thermal cut out switch has
tripped
The thermostat has not been
set correctly
The heating element has failed Call BUFFALO agent or qualified
Action
Check the unit is plugged in correctly
and switched on
Call BUFFALO agent or qualified
technician
Replace the plug fuse
Check power supply
Call BUFFALO agent or qualified
technician
Call BUFFALO agent or qualified
technician
Set the thermostat to a higher
temperature
technician