Breville Froojie BJE520 Instruction Booklet page 18

OPERATING yOUR BREvILLE PROdUCT PAge heAder.....
NOTE
Use the speed selector table located
on the pulp container for a quick and
convenient juicing reference.
5. Press the ON/OFF switch on the control
panel to ON. The juicer will start to
operate at the selected speed. The speed
can be changed at any time during the
juicing process by adjusting the variable
speed control dial.
NOTE
After 3 minutes, the LCD display will
automatically turn off if the ON/OFF
switch is not turned ON, or a speed is
not selected.
6. With the motor running, place food into
the feed chute and use the food pusher
to gently guide food down. To extract the
maximum amount of juice, always push
the food pusher down slowly.
18
BJE520_IB_C12.indd 18
NOTE
The juicer will automatically stop
operating if the motor is stalled for
more than 10 seconds. This is a safety
feature. Either too much food is being
processed at one time or the pieces
are not small enough. Try trimming
food, cutting food into smaller pieces
of even size and/or processing a
smaller amount per batch.
To continue juicing, reset the Juicer
by pressing the ON/OFF switch on
the control panel to OFF, switch off at
power outlet and remove power cord
from power outlet, then clear the feed
chute, finally plug power cord back
into power point and switch on at
power outlet. Turn the appliance back
on by pressing the ON/OFF switch to
ON.
1. As fruit and vegetables are processed,
juice will flow into the juice jug and the
separated pulp will accumulate in the
pulp container.
The pulp container can be emptied
during juicing by turning the juicer OFF
at the control panel and then carefully
removing the pulp container. Replace
the empty pulp container into position
before continuing to juice.
27/09/12 1:43 PM