Chapter 5 Differences Between Target Device And Target Interface Circuit - NEC V850/SF1 User Manual

In-circuit emulator option board
Table of Contents

Advertisement

CHAPTER 5
DIFFERENCES BETWEEN TARGET DEVICE AND TARGET INTERFACE CIRCUIT
Differences between the signal lines of the target device and the signal lines of the IE-703079-MC-EM1 target
interface circuit are described in this chapter.
The target device is a CMOS circuit, whereas the target interface circuit of the IE-703079-MC-EM1 is configured
with an emulation circuit such as a gate array TTL or CMOS-IC.
When debugging the IE system connected to the target system, the IE system emulates as if the real target device
is operating on the target system.
Small differences occur however, because the IE system is emulating actual operation.
(1) Signals input/output to/from the emulation CPU µ PD70F3079Y
(2) Other signals
The IE-703079-MC-EM1 circuit regarding the (1) and (2) signals described above is as follows.
(1) Signals input/output to/from the emulation CPU µ PD70F3079Y
• P00
• P07/INTP6 to P01/INTP0
• P15/SCK1/ASCK0 to P10/SO0/SDA0
• P27 to P20/SI3/RXD1
• P34/VM45/TI71 to P30/TI2/TO2
• P77/ANI7 to P70/ANI0
• P83/ANI11 to P80/ANI8
• P107/KR7/TO1 to P100/KR0/TO7
(2) Other signals
• NMI
• P47/AD7 to P40/AD0
• P57/AD15 to P50/AD8
• P65/A21 to P60/A16
• P96/HLDRQ to P90/LBEN
• P117/CANRX2 to P110/WAIT
• X1, XT1
• RESET
• CLKOUT
• PORTV
DD
• CPUREG
• V
/MODE
PP
• X2, XT2
• GND0, GND1, GND2, PORTGND
28
User's Manual U15447EJ1V0UM

Advertisement

Table of Contents
loading

This manual is also suitable for:

Ie-703079-mc-em1

Table of Contents