Operation - Makita LD100P Instruction Manual

D
Continuous laser (
GB
You can switch the continuous laser function on or
F
off.
I
With the continuous laser function set on, each press
E
of the button triggers a measurement. The laser
NL
automatically switches off after 15 minutes.
P
N
Measuring with the tripod (
FIN
The reference must be appropriately adjusted in
DK
order to be able to take correct measurements with
a tripod. To do this select the TRIPOD symbol in this
S
menu item. You can switch the reference on the
TR
tripod on or off. The setting can be seen on the
CZ
display .
SK
PL
SLO
Display - keypad illumination (
HR
Automatic illumination of the display and the keypad
H
can be switched on or off.
GR
Reset - returning the instrument to
RUS
the factory settings (
LV
The instrument has a RESET function. When you
EST
select the menu function RESET and confirm, the
LT
instrument defaults to the factory settings.
ROK
CN

Operation

A reset returns the following values to their factory
)
settings:
•
•
•
•
•
)
)
TRIPOD
Operation
Switching on and off
)
CLEAR button
volume measurements, each single measurement can
)
be deleted and remeasured in series.
8
Reference (rear)
Display illumination (ON)
Beep (ON)
Unit (m(mm))
Stack and memory are erased
All customised settings and stored values are
also lost.
Switches on the instrument and laser. The
display shows the battery symbol until the
next button is pressed.
Pressing this button for longer switches the
instrument off.
The instrument switches off automatically
after six minutes of inactivity.
The last action is cancelled. While making area or
Makita LD100P