Makita 4093 Instruction Manual page 4

CAUTION:
• Always be sure that the dust bag or paper pack is
installed properly in the cleaner before use.
Improper installation may allow dust to enter the
motor, resulting in malfunction of the cleaner.
• Always switch off the cleaner after each use to pre-
vent damage to the cleaner and to lengthen the ser-
vice life of the batteries.
This cleaner can be operated in "standard" and "strong"
suction. For standard suction, slide the switch forward to
the LOW position. For strong suction, slide the switch fur-
ther to the HIGH position.
To stop the cleaner, slide the switch back to the OFF
position.
ASSEMBLY
CAUTION:
• Always be sure that the tool is switched off and the
battery cartridge is removed before carrying out
any work on the tool.
Dust disposal
CAUTION:
• Empty the cleaner before it becomes too full, or the
suction force weakens.
Depress the buttons and open the front cover.
1
Take the dust bag out of the cleaner carefully so that the
contents will not spill out. Empty the contents out of the
dust bag.
007258
1. Depress
1
2. Open
2
007259
Also empty out the dust inside the cleaner itself. Failure
to do so may cause the sponge filter to be clogged or the
motor to be damaged.
Installing dust bag
Place the dust bag into the cleaner cavity.
Insert the holder of the dust bag all the way into the slots
in the cleaner cavity.
CAUTION:
• Forgetting to install the dust bag, failure to insert
the holder of the dust bag all the way into the slots
or using a broken or ripped bag, may allow dust to
get into the motor. This may result in motor failure.
Hook the front cover onto the front lip of the cleaner.
Then close the front cover.
4
007260
007261
007262