Makita CL100D Instruction Manual page 9

From time to time wipe off the outside
(cleaner body) of the cleaner using a cloth
dampened in soapy water.
Clean out also the suction opening, dust
bag/dust pack mounting area and the dust
stopper.
CAUTION:
Never use gasoline, thinner or the like.
•
Discoloration or cracks may result.
010009
Symptom
Weak suction power
Not working
010051
NOTE:
Do not attempt to repair cleaner by
•
yourself.
To maintain product
RELIABILITY,
maintenance or adjustment should be
performed by Makita Authorized or Factory
Service Centers, always using Makita
replacement parts.
Area to be investigated
Is capsule full of dust?
Is filter clogged?
Is battery exhausted?
Is battery exhausted?
SAFETY
repairs, any
Wash the filter in soapy water when it is
clogged with dust and the cleaner power
becomes small. Dry it out thoroughly before
use. An insufficiently dried filter may cause
poor suction and shorten the service life of
the motor.
Things to Check Before Asking for
Repairs
ACCESSORIES
and
CAUTION:
other
These accessories or attachments are
•
recommended for use with your Makita
tool specified in this manual. The use of
any other accessories or attachments
might present a risk of injury to persons.
Only use accessory or attachment for its
stated purpose.
If you need any assistance for more details
regarding these accessories, ask your local
Makita Service Center.
Extension wand (Straight pipe)
•
Nozzle
•
Nozzle for carpet
•
Shelf brush
•
Corner nozzle
•
9
Fixing method
Empty dust from capsule.
Dust down or wash filter.
Recharge battery.
Recharge battery.