Makita CL100D Instruction Manual page 5

Switch action
1
010063
CAUTION:
Before inserting the battery cartridge
•
into the tool, always check to see that
the switch trigger actuates properly and
returns to the "OFF" position when
released.
To start the tool, simply pull the switch trigger.
Release the switch trigger to stop.
ASSEMBLY
CAUTION:
Always be sure that the tool is switched
•
off and the battery cartridge is removed
before carrying out any work on the tool.
Disposing of Dust
CAUTION:
Empty the cleaner before it becomes
•
too full, or the suction force weakens.
Be sure to empty out the dust inside the
•
cleaner itself. Failure to do so may
cause the filter to be clogged or the
motor to be damaged.
2
010022
1. Switch trigger
1. Capsule
2. Suction inlet
1
In order to drop dust sticking on the filter in
the capsule, tap the capsule 4 or 5 times
with your hand.
1
2
010023
Now point suction inlet downwards, turn
capsule in direction of arrow in diagram, and
disconnect capsule slowly and straight.
NOTE:
Dust may spill out when capsule is
•
opened, so be sure to set a garbage
bag beneath capsule.
1
2
010024
Remove accumulated dust from inside of
capsule and off of prefilter.
1
2
010025
Twist prefilter in direction of arrow to
unfasten securing lip from cleaner unit and
then pull off prefilter.
5
1. Capsule
2. Suction inlet
1. Prefilter
2. Capsule
1. Prefilter
2. Securing lip