NEC DS1000 Quick Setup Manual page 33

Feature Quick Steps
To cancel the Caller ID display and return your phone to its normal display:
1. Press
To turn the Caller ID display back on (after you press CLEAR to cancel it):
1. Press
To display the Caller ID data for the third party's call (i.e., use Third Party Caller ID Check):
1. Press
2. Press the key for the call you want to check.
- Press a line key while the call is ringing or connected to the third party.
- Press a loop key or Call Coverage key while the call is ringing the third party.
- Press a Hotline key while the call is connected to the third party.
3. Hang up when you are done.
To review your Caller ID log:
on (green) when you have Caller ID records you have not reviewed.
At Your 22-button and 34-Button Display Keyset
1. Press
2. Press
Press
3. Press
4. Press
At Your Super Display Keyset
1. Press
2. Press
Press
Press
3. Press
4. Press
DS1000/2000 Quick Setup Guide
.
CLEAR
CHECK .
ICM + CHECK .
You can press a line key, loop key, Call Coverage key, or Hotline key:
Your Ring/Message Lamp (the large green LED on the upper right corner of your phone) winks
CL nn.
ALL to review all your records.
OR
UNAN to review records for calls that rang your phone but were unanswered in the system.
VOL Up or VOL Down to scroll through your Caller ID records.
Press CHECK to toggle your display between its two Caller ID display modes.
to call the person back.
DIAL
nn.
CALLS
VIEW ALL to review all your records.
OR
to review records for calls that rang your phone but were unanswered in the system.
VIEW UNANS
OR
VIEW ANS to review the records just for calls that rang you phone that were answered in the system.
or to scroll through your Caller ID records.
VOL Up VOL Down
CALLBACK to call the person back.
Section 2: Customizing Features
Section 2: Customizing Features ◆ 2-9
2