NEC DS1000 Quick Setup Manual page 28

Section 2: Customizing Features
3. To enable Call Waiting / Camp-On system wide, dial 9 (for yes) + HOLD .
To disable Call Waiting / Camp-On system wide, dial 6 (for no) + HOLD .
4. Press CONF to exit program 0201.
Part II: Enable/Disable Camp-On to a Busy Extension in Class of Service
1. Enter the programming mode. You see:
USER: nnn
ENTER PROGRAM?
2. Enter 0101 + HOLD . You see:
0101:CLASS OF SERVICE
COS NUM?n
3. Enter the Class of Service (1-15) you want to program + HOLD . You see:
0101:COS:n
OFF PREM FWRD?nn
4. Press VOL Up until you see:
0101:COS:n
CAMP-ON BUSY EXT?nnn
5. To enable Camp-On, dial 9 (for yes).
To disable Camp-On, dial 6 (for no).
6. Press CONF to go back to step 3 and select another Class of Service.
Press CONF twice to exit program 0101.
Part III: Assign the Class of Service with Camp-On Enabled to the Extension
1. Enter the programming mode. You see:
USER: nnn
ENTER PROGRAM?
2. Enter 1801 + HOLD . You see:
1801:EXTENSION PROG
EXTENSION#?
3. Enter the number of the extension you want to program (e.g., 300) + HOLD . You see:
1801:EXT:nnn
PT TYP?n:nnnnnn nnn
4. Press VOL Up until you see:
1801:EXT:nnn
CLASS OF SERVICE?n
5. Enter the Class of Service (1-15) you want to assign to the extension selected + HOLD . You see:
1801:EXT:nnn
CLASS OF SERVICE?n
6. Press CONF and go back to step 3 to select another extension.
Press CONF twice to exit program 1801.
Feature Quick Steps
To Camp-On to a busy extension:
1. Call busy extension + Dial 2 (do not hang up).
2. Speak to your co-worker when they answer their Camp-On ring.
2-4 ◆ Section 2: Customizing Features
OR
By default, the attendant (extension 300) has Class of Service 1. All other extensions have Class
of Service 2.
OR
OR
OR
If you hang up, the system converts your Camp-On to a Callback.
DS1000/2000 Quick Setup Guide