Makita TD0100 Instruction Manual page 6

Adjustable locator with bit (Fig. 9)
To use the adjustable locator with bit, remove the bumper
and then install it. The bumper can be removed by pulling
forward.
For European countries only
Noise
The typical A-weighted noise level determined according
to EN60745-2-2:
Sound pressure level (L
Sound power level L
Uncertainty (K): 3 dB (A)
Wear ear protection
Vibration
The vibration total value (tri-axial vector sum) determined
according to EN60745-2-2:
Work mode: impact tightening of fasteners of the
maximum capacity of the tool
Vibration emission (a
Uncertainty (K): 1.5 m/s
EC-DECLARATION OF CONFORMITY
Model; TD0100
We declare under our sole responsibility that this product
is in compliance with the following standards of
standardized documents;
EN60745, EN55014, EN61000 in accordance with
Council Directives, 2004/108/EC, 98/37/EC.
Tomoyasu Kato
Responsible Manufacturer:
Makita Corporation
3-11-8, Sumiyoshi-cho, Anjo, Aichi, JAPAN
Authorized Representative in Europe:
Makita International Europe Ltd.
Michigan Drive, Tongwell, Milton Keynes, Bucks MK15
8JD, ENGLAND
6
): 91 dB (A)
pA
): 102 dB (A)
WA
2
): 11.0 m/s
h
2
CE 2008
Director
ENG102-1
ENG205-1
ENH101-9