Compliance With Standards - Philips BG2038 User Manual

Caution
- Use, charge and store the appliance at a temperature between
5°C and 35°C.
- Only use the adapter and the charging stand supplied to charge the
appliance.
- Never immerse the charging stand in water nor rinse it under the tap.
- If the appliance is subjected to a major change in temperature, pressure
or humidity, let the appliance acclimatise for 30 minutes before you use it.
- If the adapter or charging stand is damaged, always have it replaced
with one of the original type in order to avoid a hazard.
- Do not use the appliance if any of its parts is damaged or broken, as
this may cause injury.
- This appliance is only intended for shaving and trimming body parts
below the neckline. Do not use it to shave or trim facial or scalp hair.

Compliance with standards

- The appliance complies with the internationally approved IEC safety
regulations and can be safely used in the bath or shower.
- This Philips appliance complies with all standards regarding electromagnetic
fields (EMF). If handled properly and according to the instructions in this
user manual, the appliance is safe to use based on scientific evidence
available today.
Charging
Charging takes 1 hour (BG2038/BG2036) or 8 hours (BG2028/BG2026/
BG2025/BG2024) depending on the model. When the appliance is fully
charged, it has an operating time of up to 50 minutes. When the battery
status indicator flashes red, the battery is running low (approx. 10 minutes
of operating time left) and you need to recharge the appliance.
1 Insert the small plug into the charging stand.
2 Put the appliance in the charging stand.
, The battery status indicator flashes green to indicate that the
appliance is charging.
Note: The battery status indicator of BG2028, BG2026, BG2025 and BG2024
looks different, but works in the same way.
EnGlish
5