D-Link Storage Utility - D-Link DNS-327L User Manual

Section 2 - Getting Started
When first powered on, during the initial boot sequence, the ShareCenter™ will wait to be assigned an IP address via DHCP. If it
does not receive a DHCP assigned IP address, the ShareCenter™ will be automatically assigned a 169.254.xxx.xxx address. It is
recommended that you use the included D-Link Storage Utility software when accessing and configuring the ShareCenter™ for
the first time. If you want to change the IP address before logging in or you are having trouble connecting to the ShareCenter™
IP address, you can use the Storage Utility software included on the product CD to locate the device on your network and
make any necessary changes.
Network Storage
The D-Link Storage Utility displays any ShareCenter
Device:
devices it detects on the network here.
Refresh: Click Refresh to refresh the device list.
Configuration: Click Configuration to access the Web based configuration
of the ShareCenter
LAN:
Configure the LAN Settings for the ShareCenter
Apply: Click Apply to save changes to the LAN Settings.
Drive Mapping: Volumes available for mapping are displayed here.
Available Drive Choose an available drive letter. Click Connect to map
Letters: the selected volume. Click Disconnect to disconnect the
selected mapped volume.
About: Click About to view the software version of the Easy
Search Utility.
Click Exit to close the utility.
Exit:
DNS-327L
D-Link ShareCenter

D-Link Storage Utility

™
.
User Manual
™
™
here.
88