Usb Devices; Ups Settings; Usb Storage Information - D-Link DNS-327L User Manual

Section 4 - Configuration
Network UPS is a system management feature that uses a local UPS to protect your NAS from an abnormal shutdown due to a power failure.
To enable Network UPS to your NAS (Network Slave Mode):
1. Click to enable the Network UPS.
2. Enter an IP address of the Network UPS Master.
3. Click Save Settings to receive the critical power status from the
network UPS master.
The UPS Status will display the current status of your UPS.
Note: Make sure that the ShareCenter
UPS master.
If a UPS device is connected to the USB port on your NAS, you can select either Stand-Alone or Master mode. If you select Master mode, you will have
to enter the IP address(es) of the network UPS slaves to notify them in the event of a power failure. For more details, refer to the UPS Connectivity
section.
Click the blue arrow to reveal the USB storage Information.
It displays information on the manufacturer, product name, and size
(capacity).
Click the Unmount button to eject the USB device.
DNS-327L
D-Link ShareCenter
™
is in the same network as the network

USB Storage Information

User Manual

USB Devices

UPS Settings

250