Zero Configuration Setup - D-Link DNS-327L User Manual

Section 2 - Getting Started

Zero Configuration Setup

If you have a mydlink-enabled Cloud Router, you can take advantage of Zero Configuration. Zero Configuration automatically
configures your NAS's settings for you, and adds it to your mydlink account automatically. This type of setup allows you to
set up your DNS-327L by simply plugging it in and connecting it to your router.
Connect your NAS to your mydlink-enabled Cloud Router and Zero Configuration will automatically configure your DNS-327L
and automatically add it to your mydlink account. After the short time it takes to do this you can remotely access
your NAS from the www.mydlink.com website to manage and monitor your DNS-327L.
Connect the Ethernet Cable
Use the included Ethernet cable and plug it into the NAS. Plug the other end into an available port on your router. If you wish
to use your NAS wirelessly, you will be able to remove the cable from the router after Zero Configuration Setup is complete.
Attach the External Power Adapter
Connect the power adapter to the power connector on your NAS, then plug the power adapter into a wall outlet.
DNS-327L 15
D-Link ShareCenter User Manual