Disk Management; Hard Drive Configuration - D-Link DNS-327L User Manual

Section 4 - Configuration
To setup the Hard Drive RAID configuration of your ShareCenter
Hard Drive Configuration menu item on the left of the window. This menu will allow you to set the RAID type and format your hard drives.
Hard Drive
Your ShareCenter
Configuration:
configured here and formatted in various RAID
configurations.
Current Raid Type: If the drives are already formatted the RAID
configuration will be displayed here.
Set RAID type and
Click on this button to launch a wizard that
Reformat:
allows you to select the RAID configuration
and format the drives.
Auto-Rebuild If you have chosen RAID 1 as the configuration
Configuration: option, then set the Auto-Rebuild function
here using the radio buttons.
Enable Auto-Rebuild: Enabling Auto-Rebuild will rebuild a failed
RAID 1 drive when a new drive has replaced
the degraded one.
Disable Auto-Rebuild:
If you do not want to automatically rebuild
drives after a failure when using the RAID 1
functionality then you can check this option.
Note: You can still rebuild a drive using the RAID
1 functionality however you must initiate the
rebuild manually.
Manual Rebuild Now: If Auto-Rebuild is disabled then you can use
the Manual Rebuild option by clicking this
button.
DNS-327L
D-Link ShareCenter

Disk Management

Hard Drive Configuration

™
hard drives can be
User Manual
™
, click on the Management tab and then the Disk Management icon. Select the
106