Makita 4076D Instruction Manual page 10

Disposing cleaner
A Ni-Cd battery is built into this cleaner. Always remove it
before disposing of the cleaner.
Removing built-in battery
CAUTION:
• Never remove the built-in battery from the cleaner
except when disposing of the cleaner. The battery will
be damaged or a battery short-circuit could result.
• Do not touch the terminals with any conductive
material.
• Avoid storing battery unit in a container with other
metal objects such as nails, coins, etc.
• Do not expose battery unit to water or rain.
• Do not disassemble or alter battery unit.
1. To remove the rear cover, push it in the direction of
the arrow. (Fig. 35)
2. Withdraw the built-in battery halfway. (Fig. 36)
3. Disconnect the three lead wires from the battery by
pressing the connector on the part 25 in the
direction of arrow shown in the figure and pulling
them. Then withdraw the battery unit completely.
4. Put the removed battery unit in a plastic bag so that
it is not circuit-shorted. (Fig. 37)
To maintain product SAFETY and RELIABILITY, repairs,
any other maintenance or adjustment should be
performed by Makita Authorized or Factory Service
Centers, always using Makita replacement parts.
10
ACCESSORIES
CAUTION:
• These accessories or attachments are recommended
for use with your Makita tool specified in this manual.
The use of any other accessories or attachments might
present a risk of injury to persons. Only use accessory
or attachment for its stated purpose.
If you need any assistance for more details regarding
these accessories, ask your local Makita Service Center.
• Extension wand (Straight pipe)
• Nozzle
• Corner nozzle
• Dust bag
• Paper pack
• Dust stopper
• Charger DC7021