Switching Off The Unit; Unloading The Dishwasher; Delay Start - Kenwood KID60B12 Installation Instructions Manual

switching off the unit

To save energy, remember to switch the dishwasher off using the
will continue to use electricity until it is switched off with the
If the dishwasher is not going to be used for a long period of time, e.g., you are going on
holiday, please disconnect the dishwasher from the mains supply and switch off the water
supply.

unloading the dishwasher

Allowing dishes to cool down before unloading is important as dishes tend to break and chip more
easily when they are hot. Therefore, if you open the dishwasher door fully after switching off, it will
allow the dishes to cool down much faster.
Unload the lower basket first, followed by the cutlery basket and then the upper basket.
This will prevent water drops from the upper basket from falling onto the dishes in the lower
basket.

delay start

The starting time of a washing programme can be delayed and adjusted. Please follow the steps
below.
1. Open the dishwasher door and load your soiled dishes and crockery.
2. Press the ON/OFF button to turn on the dishwasher.
3. Select your preferred programme.
4. Press the button.
5. Set the required delay start time using the
Each press of this button increases the delay start time by 1 hour increments.
6. Close the door. The unit will start the programme at the assigned time automatically.
ON/OFF button. The dishwasher
ON/OFF button.
button.
27