Linksys LAPAC1750 User Manual page 94

Factory Default
Reboot
Go to Maintenance > Maintenance > Reboot to power cycle the device. The current configuration
file will remain after reboot.
To restore your access point to its factory defaults,
select an option and click Save.
• Reset Parameters that can share with
Slaves ONLY
When current AP is a master of a cluster,
select this option to restore all sharable
parameters of current AP and its slaves to
factory defaults. Cluster settings and non-
sharable parameters will not reset.
• Reset All Parameters to Factory Default
• No
Don't restore to factory defaults.
94