Factory Default - Linksys LAPAC1750 User Manual

Backup/Restore to/from Local PC
Backup
Configuration
Restore
Configuration
Backup/Restore to/from TFTP server
Backup
Configuration
Restore
Configuration

Factory Default

It's highly recommended you save your current configuration file before you restore to factory
default settings. To save your current configuration file, click Maintenance > Configuration
Backup/Restore.
Once you have the access point working properly, you
should back up the settings to a file on your computer.
You can later restore the access point's settings from
this file, if necessary.
To create a backup file of the current settings:
• Click Backup.
• If you don't have your browser set up to save
downloaded files automatically, locate where
you want to save the file, rename it if you like,
and click Save.
To restore settings from a backup file:
1. Click Choose File.
2. Locate and select the previously saved backup
file.
3. Click Restore.
To create a backup file of the current settings:
1. Enter the destination file name you plan to save
in TFTP server.
2. Enter the IP address for the TFTP server. Only
IPv4 addresses are supported.
3. Click Backup.
To restore settings from a backup file:
1. Enter the source file name stored in TFTP
server.
2. Enter the IP address for the TFTP server. Only
IPv4 addresses are supported.
3. Click Restore.
93