Linksys LAPAC1750 User Manual page 16

Log Types
Log Types
Email Alert
Email Alert
SMTP Server
Data Encryption
Port
Username
Password
Email Address for
Logs
Log Queue Length
Log Time
Threshold
Syslog
Syslog Notification
IP Type
Server IP Address
Select events to log. Checking all options increase the
size of the log, so enable only events you believe are
required.
Enable email alert function.
Enter the e-mail server that is used to send logs. It can
be an IPv4 address or a domain name.
Valid characters include alphanumeric characters, "_", "-
" and ".". Maximum length is 64 characters.
Enable if you want to use data encryption.
Enter the port for the SMTP server. The port is a value
from 1 to 65535 and default is 25.
Enter the Username to login to your SMTP server.
The Username can include up to 32 characters. Special
characters are allowed.
Enter the Password to login to your SMTP server.
The Password can include up to 32 characters. Special
characters are allowed.
Enter the email address the log messages are to be
sent to.
Valid characters include alphanumeric characters, "_", "-
", "." and "@". Maximum length is 64 characters.
Enter the length of the queue: up to 500 log messages.
The default is 20 messages. When messages reach the
set length the queue will be sent to the specified email
address.
Enter the time threshold (in seconds) used to check if
the queue is full. It's a value from 1 to 600 and default
is 600 seconds.
Enable Syslog notification.
Select the IP type of the syslog server: IPv4 or IPv6.
Enter the IPv4 or IPv6 address of syslog server here.
16