Using WPA2-PSK
For each of the following items, each wireless station must have the same settings as the wireless
access point.
Mode
On each PC, the mode must be set to Infrastructure.
SSID (ESSID)
This must match the value used on the wireless access point.
The default value is LinksysSMB24G for radio 1 and
LinksysSMB5G for radio 2.
Note—The SSID is case sensitive.
Wireless
On each client, wireless security must be set to WPA2-PSK.
Security
Using WPA2-Enterprise
This is the most secure and most complex system.
WPA-Enterprise mode provides greater security and centralized management, but it is more
complex to configure.
Wireless Station Configuration
For each of the following, wireless stations must have the same settings as the wireless access
point.
•
The pre-shared key entered on the access point must
also be entered on each wireless client.
The encryption method (e.g. TKIP, AES) must be set to
•
match the access point.
105