Service Information - Whirlpool CGR3520ADH Owner's Manual

Gas ranges with self-cleaning oven
Table of Contents

Advertisement

SERVICE INFORMATION
Surface burner fails to light
a. powersupplynotconnected
a. connectpower,checkcircuit
breakeror fuse box
b. air inthe gas line
b. see page7 for instructions o n
bleeding air from the gas line
c. cloggedburner port(s)
c. clean ports with straight pin
d. surface control not completely
d. turn controlto the LITE positionuntil
turned to the LITEpositionor turned
the burner ignites, then turn control
too quickly from the LITEposition
to desiredflame size
e. powerfailure
e. see page 7 to light burner during a
powerfailure
f. sealed burner models: Burner will
f. clean and dry burner head.If broken
not light if the ignitor is damaged,
or damaged, call a serviceman.
soiled, wet or if the port directly
belowthe ignitor is blocked.
Burnerflame uneven
a. cloggedburner port(s)
a. clean portswithstraight pin
Surface burner flame
a. air/gasmixturenot proper
a. call servicemanto adjust burner
• lifts off port
b. no pan in place
b. always place pan on grate before
• yellow in color
lighting burner.
NOTE: Lifting of flame is normal for
NOTE: Be sure installer properly
sealed burners. Some yellow tipping
adjusted range at time of installation.
with LP gas is normal and acceptable.
Surface burner ignitor
a. controlknob is in the LITE position,
a. be sure ALL surface burnercontrol
productingclickingsound
NOTE:The lifeof the ignition
knobsare inthe OFF position or are
systemmay be shortenedifthe
adjusted to the desiredflame
knobis left in the LITE position,
setting
b. surfacecontrol s witchis moistas a
b. allowswitchto drythen relight
resultof cleaningthe range,
burner
c. malfunctioning switch
c. call servicemanto check
Oven burner fails to light
a. powersupplynotconnected
a. connect power, check circuit
breakeror fuse box
b. powerfailure
b. ovenwillnotoperateduring a power
failure
c. ovenincorrectly s et
c. See pages5 or 12
d. AutomaticOvenCooking feature
d. See page16
incorrectlyset
Poppingsoundheard when
This is a normalsound that occurswith some typesof gaswhen a hot burneris turned
burner extinguishes
off. The poppingsound is not a safety hazardand willnotdamagethe appliance.
Clock and/or oven light
a. powersupplynotconnected
a. connectpowersupply, c heckcircuit
does not work
breakeror fuse box
b. bulbmay be looseor burnedout
b. tightenor replacelightbulb
c. malfunctioning s witch,starteror
c. call servicemanto check
ballast
d. call servicemanto check
d. malfunctioningclock or loose wiring

Advertisement

Table of Contents
loading

Table of Contents