Ftp - D-Link DCS-960L User Manual

Section 3 - Configuration
This section allows you to configure your camera to send snapshots and video clips to an FTP server. You can set the camera to send snapshots and
video clips to different FTP servers.
Host Name:
Enter the IP address of the FTP server that you will be connecting to.
Port:
Enter the port of the FTP server that you will be connecting to.
User Name: Enter the user name of your FTP server account.
Password:
Enter the password of your FTP server account.
Path: Enter the destination path/folder to save files to on the FTP server.
Interval:
Enter the amount of time to wait before the camera can send another e-mail.
Passive Mode: Enabling passive mode may help you reach your FTP server if your camera is
behind a router protected by a firewall.
Test FTP Server: Clicking on the Test button will send a test JPEG snapshot to the FTP server
specified above to make sure that your settings are correct.
D-Link DCS-960L User Manual

FTP

38