Preset - D-Link DCS-960L User Manual

Section 3 - Configuration
This screen allows you to set preset points for the ePTZ function of the camera, which allows you to look around the camera's viewable area by
using a zoomed view. Presets allow you to quickly go to and view a specific part of the area your camera is covering, and you can create preset
sequences, which will automatically change the camera's view between the different presets according to a defined order and timing you can set.
ePTZ Enable:
Check this box to enable ePTZ for your camera.
ePTZ Speed: You may select a value between 1 and 10. 0 is the slowest and 10 is the fastest.
Arrow Buttons
Use these buttons to move to a specific part of the viewing area, which you can
and Home
then set as a preset. Click the Home button to return to the center of the viewing
Button: area.
Input Preset Enter the name of the preset you want to create, then click the Add button to
Name:
make a new preset. If an existing preset has been selected from the Preset List,
you can change its name by typing in a new name, then clicking the Rename
button.
Preset Position:
Click the drop-down box to see a list of all the presets that have been created.
You can select one, then click the GoTo button to change the displayed camera
view to the preset. Clicking the Remove button will delete the currently selected

preset.

Preset Sequence: This section allows you to create a preset sequence, which automatically moves
the camera's view between a set of preset views.
D-Link DCS-960L User Manual
Preset
33