D-Link DCS-960L User Manual page 25

Section 3 - Configuration
Snapshot Notifications is a feature to send image snapshots via FTP or e-mail when a
trigger is activated.
Snapshot:
Check this box to enable the Snapshot function.
Trigger By: Select whether to record when triggered by Motion or Sound, according to a
Schedule, or to Always record. Checking the Only During box will allow you to
set a schedule for when the snapshot feature will be enabled.
Source: Select which Video Profile to use when taking snapshots.
Snapshot Type:
Select whether to take a single snapshot or to take 6 snapshots with a selectable
interval between them.
Target: Select where you want the snapshot to be sent. It may be uploaded to an FTP
server or sent to an e-mail address.
Click Next to continue.
Video Clip Notifications allow you to send video clips via FTP or e-mail when a trigger is
activated.
Video Clip:
Check this box to enable the Video Clip function.
Trigger By: Select whether to record when triggered by Motion or Sound, according to a
Schedule or Always record. Checking the Only During box will allow you to set
a schedule for when the Video Clip feature will be enabled.
Source: Select which Video Profile to use when taking Video Clips.
Video Clip:
Here you can specify how much video to record before the event and how much
video to record in total for the clip.
Target: Select where you want the video clip to be sent. It may be uploaded to an FTP
server or sent to an e-mail address.
Click Next to continue.
D-Link DCS-960L User Manual 25