D-Link DCS-930L Technical Support Setup Procedure
Hide thumbs
Also See for DCS-930L:
- Quick installation manual (80 pages) ,
- User manual (76 pages) ,
- Install manual (39 pages)
Advertisement
Quick Links
Technical Support Setup Procedure
Setup Wizard - Setting Up DCS-930L & DCS-932L WITH mydlink Account
Step 1: Run the CD Set-Up that came with the DCS-930L/DCS-932L. Click Autorun to run mydlink
Set-Up Wizard. On the mydlink Set-Up Wizard screen, click Start button.
Step 2: Select the radio button "No, my router does not have WPS Support". Click Next button.
Advertisement
Related Manuals for D-Link DCS-930L
Summary of Contents for D-Link DCS-930L
- Page 1 Technical Support Setup Procedure Setup Wizard - Setting Up DCS-930L & DCS-932L WITH mydlink Account Step 1: Run the CD Set-Up that came with the DCS-930L/DCS-932L. Click Autorun to run mydlink Set-Up Wizard. On the mydlink Set-Up Wizard screen, click Start button.
- Page 2 Step 3: Tighten the collar on the camera base after moving the camera to the position you want. Click Next button. Step 4: Connect the included Ethernet cable to the port on the DCS-930L/DCS-932L camera. Connect the other end of the cable to an available LAN port on your router. Click Next button.
- Page 3 Step 5: Attach the power adapter to the power jack on the back of the DCS-930L/DCS-932L camera, and connect the power adapter to a power outlet. Ensure that the Status LED on the front of the camera is solid green after 30 seconds. Click Next button.
- Page 4 Step 7: Please wait while the Wizard is detecting the camera on your network. Step 8: You will now see the camera device information with its corresponding IP Settings and MAC Address. Click Next button.
- Page 5 Step 9: Please enter a password to secure you camera. Click Next button when done. Step 10: If you want to setup your camera wirelessly make sure that your router supports wireless. If so, select the radio button “I want to connect my camera wirelessly”. On the Available Wireless Network, select the name of your wireless network and click Next button.
- Page 6 Step 11: For wireless setup, enter the wireless encryption used on your wireless network and click Next button. Step 12: Please unplug the Ethernet cable from the back of your camera, then click Continue button. Please wait while the camera is restarting.
- Page 7 Step 13: Select the radio button “Yes, I already have a mydlink account” if your already registered before or select the radio button on No, I need to sign up for a new account if you did not register in mydlink yet. Click Next button. Step 14: Set-up is Complete.
- Page 8 Step 15: You are now ready to access the camera using the mydlink account. Open your web browser and type http://www.mydlink.com” on the address bar. Press the enter key on your keyboard. Step 16: Click on Sign In to mydlink. Step 17: Enter the E-Mail Address and the Password used to register on mydlink and then click on the Sign In button.
- Page 9 Step 18: The image of the camera will now show up on your mydlink account. Note: You may repeat the same procedure to add more mydlink ip cameras to your mydlink account.