Related Manuals for AEG CS 66
Summary of Contents for AEG CS 66
-
Page 1: Instructions For Use
CS 66 Instructions for use Cover AEG.indd 1 Cover AEG.indd 1 06.12.2008 10:59:21 06.12.2008 10:59:21... - Page 2 THANK YOU FOR BUYING AN AEG CIRCULAR SAW Your new circular saw has been engineered and manufactured to AEG’s high standard for dependability, ease of operation and operator safety. Properly cared for, it will give you years of rugged, trouble free performance.
-
Page 3: Rules For Safe Operation
RULES FOR SAFE OPERATION The purpose of safety rules is to attract your attention to possible 10. Always wear safety glasses. Everyday eyeglasses have only impact resistant lenses, they are not safety glasses. dangers. The safety symbols and the explanations with them, require your careful attention and understanding. -
Page 4: Additional Safety Instructions For Circular Saws
OTHER SAFETY PRECAUTIONS FOR ADDITIONAL SAFETY INSTRUCTIONS USING CIRCULAR SAW FOR CIRCULAR SAWS ■ Do not use saw blades that are deformed or cracked. 1. Keep guards in place and in working order. Never wedge or tie lower blade guard open. Check operation of ■... - Page 5 FEATURES 1. TRIGGER SWITCH 8. OUTER FLANGE 15. PROJECTION 2. SAFETY BUTTON 9. LOWER GUARD 16. DEPTH SCALE 3. DUST NOZZLE 10. BLADE 17. DEPTH ADJUSTMENT 4. UPPER GUARD 11. BASE PLATE KNOB 5. LOWER GUARD LEVER 12. KNOB BOLT 18.
- Page 6 APPLICATIONS (Use only for the purpose listed below.) 1. Sawing wood. NOISE BUILD-UP Noise (sound pressure level) in the workplace can exceed 85 dB (A). In this case, sound insulation and hearing protection measures must be taken by operator. ATTACHING AND REMOVING THE BLADE (FIG.
-
Page 7: Adjusting The Riving Knife
ADJUSTING THE RIVING KNIFE (FIG. 5) WARNING! 1. Do not use saw blades the disc of which is thicker or the set of which is smaller than the thickness of the riving knife. 2. Ensure that the riving knife is adjusted so that: (Fig. 5) A: The distance between the riving knife and the toothed rim of the saw blade is not more than 5 mm. - Page 8 OPERATION (FIG. 11) DANGER: Keep hands away from the cutting area. When operataing the tool keep the cord away from the cutting area and position it so that it will not be caught on the work piece during the cutting operation. It is important to saw with steady and even pressure (DO NOT FORCE) in order to obtain a uniform cut.
-
Page 9: Maintenance
SERVICE Now that you have purchased your tool, should a need ever exist for repair parts or service, simply contact your nearest AEG Authorised Service Centre. Be sure to provide all perti- nent facts when you call or visit. LUBRICATION... - Page 10 NOTES...
- Page 12 AEG Elektrowerkzeuge Max-Eyth-Straße 10 D-71364 Winnenden 961067332-03A Germany Cover AEG.indd 2 06.12.2008 10:59:21...