Makita BDF456 Technical Information page 5

R
epair
[3] DISASSEMBLY/ASSEMBLY
[3]-2. Gear assembly and Motor section
DISASSEMBLING
(3) Disassemble Gear assembly and Motor section. (Fig. 9)
Fig. 9
3. Unscrew nine 3x16 Tapping screws,
then remove Housing (R).
Housing (R)
6. Remove Armature along with Yoke unit
from Brush holder complete.
4. Remove the assembly of
Motor section and Gear section.
Yoke unit
Armature
Brush holder
complete
5. Remove Speed change lever,
then separate Gear assembly
from Motor section.
Speed change lever
Gear assembly
7. Pull Armature from Yoke unit.
Yoke unit
Armature
P 5/10
Motor section