Table of Contents
Advertisement
Item
2
ETHERNET
1 2 3 4
3
RESET
4
CABLE
5
POWER
*
USB
MAC Label
The SVG2501 Media Access Control (MAC) label contains the MAC address which is a
unique, 48-bit value that identifies each Ethernet network device.
To receive data service, you must provide the MAC address marked HFC MAC ID to
your Internet service provider.
To receive VoIP service, you may have to provide the MTA MAC ID to your VoIP service
provider.
Product Overview • MAC Label
SVG2501 Series Wireless Voice Gateway • User Guide
550885-001-a
Description
Use any Ethernet port to connect an Ethernet-equipped computer,
hub, bridge, or switch using an RJ-45 cable.
Green LED — Indicates a 100Base-T data rate connection
Amber LED — Indicates a 10Base-T data rate connection
•
When LED is ON — Indicates there is no data traffic and a
connection is established
•
When LED is FLASHING — Indicates data activity is detected on
the port
•
When LED is OFF — Indicates the device is not powered ON or
there is no Ethernet connection
Note: When running on battery power, the Ethernet connection will
shut off.
Resets the gateway
It may take 5- to 30 minutes to find and lock on the appropriate
communications channels.
Press and hold the RESET button for five seconds or longer to
restore the factory default settings.
Coaxial cable connection to the cable wall outlet
+14VDC Power connector
Available on SVG2501U models only
For Windows computers only — DO NOT connect a Mac or UNIX
computer to the USB port.
B
®
5
Advertisement
Table of Contents
