Table of Contents
Advertisement
A
If the solutions listed here do not solve your problem, contact your service provider.
Before calling your service provider, try pressing the Reset button on the rear panel of
the SVG2501.
Note: Press RESET on the rear panel to restore the default settings. You will lose your
custom configuration settings, including Parental Control, Firewall, and Advanced
settings.
Resetting the SVG2501 may take 5- to 30 minutes. Your service provider may ask for the
status of the lights as described in
Solutions
Gateway Problem
Power LED is off
Cannot send or
receive data
Troubleshooting • Solutions
SVG2501 Series Wireless Voice Gateway • User Guide
550885-001-a
Front Panel LEDs and Error
Table 2 – Troubleshooting Solutions
Possible Solution
•
Check that the SVG2501 is properly plugged into the electrical
outlet.
•
Check that the electrical outlet is working.
•
Press the RESET button on the rear panel.
•
On the front panel, note the status of the LEDs and refer to
Panel LEDs and Error Conditions
cable TV, check that the TV is working and the picture is clear. If
you cannot receive regular TV channels, the data service will not
function.
•
Check the coaxial cable at the SVG2501 and wall outlet.
Hand-tighten if necessary.
•
Check the IP address. Follow the steps for
address
for your system. Call your service provider if you need an
IP address.
•
Check that the Ethernet (or USB) cable is properly connected to
the SVG2501 and the computer.
•
If a device is connected via the Ethernet port, check the ONLINE
LED to verify connectivity.
Troubleshooting
Conditions.
to identify the error. If you have
verifying the IP
B
Front
20
Advertisement
Table of Contents
