Phone Settings - AEG voxtel s110 combo Quick Start Manual

10

PHONE SETTINGS

Your phone comes with a selection of settings that you can change to personalise your phone the way
you like it to work.
10.2.1 Set the handset language
Press and / to select "HS SET".
OK
Press and / to select "LANGUAGE".
OK
Press and / to select the desired language.
OK
Press to confirm.
10.2.2 Set the auto answer
If you turn on the Auto Answer, you can answer a call automatically by just lifting the cordless handset off
the charger without having to press any key.
Press and / to select "HS SET".
OK
Press and / to select "AUTO ANS".
OK
Press and / to turn on or off the auto answer feature.
OK
Press to confirm.
10.2.3 Reset your cordless handset
You can reset your phone to the default settings. After reset, all your personal settings, call list entries and
redial list entries will be deleted, but your phonebook remains unchanged.
Press and / to select "DEFAULT."
OK
Press to show "PIN?"
Enter the 4-digit system PIN (default value 0000).
OK
Press to show "CONFIRM?"
OK
Press to confirm, and the phone will be reset to its default settings.
11 REGISTRATION
Important:
When you purchase your phone system, all handsets are already registered to your base, so you do not
need to register them. Handset registration is only necessary when you buy extra handsets or if a handset
has become faulty.
You can register additional handsets to have up to five handsets per base unit, with each handset's number
(1 to 5) shown on its display.
Note:
Each handset can only be registered to one base.
To check whether a handset is registered, make sure mains power to the base unit is switched on and the
handset is within range. The handset's display should show its number and the
If the display shows "REGISTER ", you need to register the handset again using the following process:
On the cordless handset:
Press and / to select "REGISTER".
OK
Press to display "PIN ?", enter the 4-digit PIN code for the base (default PIN code is 0000).
OK
Press and the display will flash "WAITING".
10
should be steadily on.