Scan A Bar Code - Honeywell Dolphin CT50 User Manual

Chapter 3 — About the Scanner

Scan a Bar Code

44
The scanner has an aiming beam to help you correctly frame bar codes.
It also supports omni-directional (360°) scanning to make it easier for
you to scan bar codes.
Note: Before you start scanning bar codes, use the Settings app to
enable only the bar code symbologies that you need.
1 Tap All Apps > Demos > ScanDemo.
2 Point the scanner window at the bar code and hold the computer
steady a few inches from the label.
3 Press one of the Scan buttons or press Scan on the touch screen.
Make sure the entire bar code is inside of the illumination frame.
When the scanner successfully reads a bar code, you hear a high
beep and the Good Read LED turns on briefly.
Dolphin CT50 and CT50h Mobile Computer User Guide