Imager/Trigger Settings; Imager Settings; Trigger Settings; Notification Settings - Honeywell Dolphin CT50 User Manual

Notification Settings

Setting
Good Read Notification
Bad Read Notification
Vibrate Enabled
Dolphin CT50 and CT50h Mobile Computer User Guide

Imager Settings

You should not need to modify the Imager Settings. The Override
Recommended Values setting is disabled by default. The recommended
Imager Settings are designed to work in a wide range of environments
and should only be modified if you have an advanced understanding of
imagers.

Trigger Settings

Use the Trigger Settings to configure how the scan buttons work.
Trigger Settings
Setting
Decode Timeout
Notification Settings
Use the Notification Settings to configure how your computer responds
when you scan a bar code.
Description
Enables or disables a good read notification.
The notification consists of a green blink of the
Good Read LED, a short beep, and an optional
short vibration.
Enables or disables notification of a failed scan.
The notification consists of a red blink of the
Good Read LED, an error beep, and an optional
short vibration.
Enables or disables whether the computer
vibrates when there is a good or bad read.
Description
Scanning automatically turns off after this
number of seconds if the scan trigger is
pressed and nothing has successfully
decoded.
Chapter 3 — About the Scanner
Default
Enabled
Disabled
Disabled
Default
20
43