Yamaha HTR-6150 Service Manual page 21

G Confirmation of model name (U, C, F models)
After replacement of DSP P.C.B. or writing of the firmware, make sure to activate the self-diagnostic function and change
the "M6 Model ID" setting to the same model name as this unit (RX-V563 or HTR-6150).
1. Connect the power cable of this unit to the AC outlet.
2. Press the "MAIN ZONE ON/OFF" (RX-V563, HTR-6150) / "STANDBY/ON" (DSP-AX563) key while simultaneously
pressing the "STRAIGHT" and "AUDIO SELECT" keys. (Fig. 7)
The self-diagnostic function is activated.
3. Select the self-diagnostic function menu "M6. Model ID".
"MAIN ZONE ON/OFF" key
(RX-V563, HTR-6150)
"STANDBY/ON" key
(DSP-AX563)
"STRAIGHT" key
4. Press "PRESET/TUNING<" or "PRESET/TUNING>"key and select the model name.
"PRESET/TUNING " key
M6.RX-V563
"AUDIO SELECT" key
Fig. 7
"PRESET/TUNING " key
M6.HTR-6150
Fig. 8
RX-V563/HTR-6150/DSP-AX563
21