Makita DTD137 Instruction Manual
Hide thumbs
Also See for DTD137:
- Instruction manual (88 pages) ,
- Instructions manual (84 pages) ,
- Instruction manual (72 pages)
Table of Contents
Advertisement
Quick Links
Download this manual
See also:
Instruction Manual
Advertisement
Table of Contents
Related Manuals for Makita DTD137
Summary of Contents for Makita DTD137
- Page 1 INSTRUCTION MANUAL Cordless Impact Driver DTD137 DTD148 014962 IMPORTANT: Read Before Using.
-
Page 2: Specifications
The following show the symbols used for the equipment. according to EN60745: Be sure that you understand their meaning before use. ･ Read instruction manual. Model DTD137 Sound pressure level (L ) : 95 dB (A) ･ Only for EU countries... - Page 3 Do not use any adapter plugs with earthed (grounded) power EC Declaration of Conformity tools. Unmodified plugs and matching outlets will Makita declares that the following Machine(s): reduce risk of electric shock. Designation of Machine: Avoid body contact with earthed or grounded...
- Page 4 Personal safety 21. Maintain power tools. Check for misalignment or 10. Stay alert, watch what you are doing and use binding of moving parts, breakage of parts and common sense when operating a power tool. any other condition that may affect the power Do not use a power tool while you are tired or tool’s operation.
- Page 5 Always be sure you have a firm footing. Be careful not to drop or strike battery. Be sure no one is below when using the tool Do not use a damaged battery. in high locations. 10. Follow your local regulations relating to Hold the tool firmly.
-
Page 6: Functional Description
Battery protection system FUNCTIONAL DESCRIPTION (Lithium-ion battery with star marking) CAUTION: 1. Star marking Always be sure that the tool is switched off and the • battery cartridge is removed before adjusting or checking function on the tool. Installing or removing battery cartridge 1. - Page 7 Reversing switch action Lighting up the front lamp 1. Reversing CAUTION: switch lever Do not look in the light or see the source of light • directly. 1. Lamp 014967 This tool has a reversing switch to change the direction of rotation.
- Page 8 Maximum blows Impact force grade Application Work displayed on panel DTD137 DTD148 Hard Tightening in underwork 3,600 3,800 Tightening when force material/ Tightening long (min (min and speed are desired. screws/ Tightening bolts. Medium 2,600 2,600 Tightening when a good...
- Page 9 • even with a recharged battery cartridge, cool down the tool fully. If the status will not change, stop using and have the tool repaired by a Makita local 011406 service center. To install the bit, pull the sleeve in the direction of the arrow and insert the bit into the sleeve as far as it will go.
-
Page 10: Operation
To remove the bit, pull the sleeve in the direction of the Model DTD137 arrow and pull the bit out. NOTE: Standard bolt If the bit is not inserted deep enough into the • (kgf cm) (1,428) sleeve, the sleeve will not return to its original position and the bit will not be secured. -
Page 11: Maintenance
If you need any assistance for more details regarding the screw or the point of the driver bit may be these accessories, ask your local Makita Service Center. overstressed, stripped, damaged, etc. Before Screw bits •... - Page 12 Makita Jan-Baptist Vinkstraat 2, 3070, Belgium Makita Corporation Anjo, Aichi, Japan www.makita.com 885363-229...