Cisco 4000 series Installation Manual page 16

Mounting the Chassis Shell on a Wall
Mounting the Chassis Shell on a Wall
After you have installed the telco rack-mount or wall-mount brackets, take the following steps to
mount your system on a wall:
Step 1
Step 2
Figure 17
Wall-mount bracket
19 x 19" or larger
plywood board
16 Cisco 4000 Series Rack-Mount and Wall-Mount Installation
Install the wall-mount brackets following the procedures described in the section
"Preparing the Chassis for Rack-Mounting or Wall-Mounting" and "Overview of Telco
Rack-Mounting and Wall-Mounting."
Choose the wall on which you will mount the Cisco 4000 chassis. When choosing a
location, consider cable lengths and limitations, and wall structure (see Figure 17).
Wall-Mounted Chassis
Front of the
chassis
Wood screws
Wood screws