Cisco 4000 series Installation Manual page 10

Mounting the Chassis in a Standard Rack
Installing Standard Rack-Mount Brackets into a New Version of the Chassis
Take the following steps to install standard rack-mount brackets into the new version of the chassis
shell:
Step 1
Step 2
Figure 9
Rack-mount
bracket
Figure 10
8-32 flat-head
machine screws
10 Cisco 4000 Series Rack-Mount and Wall-Mount Installation
Insert one rack-mount bracket through the slot on each side of the front and rear of the
chassis shell (see Figure 9).
Fasten the brackets to each side of the chassis shell with the 8-32 flat-head machine screws
provided (see Figure 9 and Figure 10). Only four 8-32 flat-head machine screws are
required for each bracket.
Standard Rack-Mount Bracket Insertion in a New Version of the Chassis
8-32 flat-head
machine screws
Standard Rack-Mount Bracket Installation in a New Version of the Chassis
Rack-mount
bracket
Rear of the chassis
8-32 flat-head
machine screws
10-32
machine
screws
Front of the
chassis shell
Front of the
chassis shell