Section 3 - Configuration
If selecting the New Hard Drive Install Click n' Connect menu option, carry out the following steps to install the new
hard drive:
1. For new hard drive installs, the Click n' Connect
menu illustrates how to install the SATA hard
disk. If you have not already done so, install the
drive as shown. If you have already installed the
hard disk, connected and powered on the device,
ignore the hardware setup menus.
Click on the Next button to proceed.
2. Connect the DNS-313 to the Ethernet port on your
computer or router and click on the Next button
to proceed to the last hardware setup illustration.
D-Link DNS-313 User Manual
Click n' Connect Utility
New Hard Drive Install
13