I Front Control Panel Functions; Front Control Panel Functions; System Reset - Mitsubishi WS-73909 Owner's Manual

Part II: Installation
Front Control Panel
Figure 1. Front Control Panel.
The buttons on the front control panel that are highlighted in gray are duplicated on the
remote control. The top row of labels show the control functions when there are no TV
menus displayed on the screen. The bottom row of labels show the control functions when
the TV menus are displayed on the screen. See Remote Control Functions: Overview,
page 60, for details on their functions.

System Reset

If the TV will not respond to either the remote control or the front panel controls and will
not power off, press the SYSTEM RESET button with a pointed item like the point of a
ball point pen. The TV will turn off and the TIMER light will a sh qui c kl y f o r a bout o ne
minute. When the TIMER light stops a shi n g, y ou m a y t u r n on t h e TV a gai n . T he changes
you made while the TV was on before you used the SYSTEM RESET button may be
cancelled, however, the changes you made previously are not cancelled. Only the changes
since the last power on may be lost when the system reset button is pressed. All other
settings are retained.
Timer
The green light is a multi-function indicator. Each time the TV is plugged into the wall
electrical outlet, or when power is restored after a power failure, or after using the SYSTEM
RESET button, this light will a sh r a pi d l y f o r a bout o ne m i n ut e . D o not a t te m p t to t u r n
on the TV during this period, wait for the a shi n g t o st o p bef o r e at te m p t in g t o t u r n t h e TV
on. When the TV is turned on, the light will be illuminated steadily. If the TV has been
programmed to turn on automatically using the Timer feature, this light will a sh sl o wl y
while the TV is powered off.
A/V Reset
Press this button to reset all A/V memories to the factory default settings.
Input 5
This input can be used for convenient connection of a camcorder or other video device to
the TV. Please note that if you connect to the S-VIDEO terminal, the VIDEO terminal is
deactivated. The VIDEO terminal is active when there is no S-Video connection.
12
12